ERCO 3600
The ERCO3600 is an under wheel scissors lift with a maximum capacity of 3600kg. The CT versions are ideal for alignment operations of front and rear wheels. To enable rear alignment the lift is fitted with slip plates on three axes (transversal, longitudinal and diagonal) which enable all movements required for adjustment procedures.
The other versions can also be used for maintenance operations, repairs and for technical vehicle test procedures in conjunction with the play detector; in PT4 versions the play detector is hydraulically powered by means of the same control cabinet as the lift. Designed for both in-floor installation or on-floor installation with drive-through ramps either indoors or outdoors with adequate roof shelter, ERCO3600- 3601 lifts are equipped with safety devices to ensure operator safety in the event of faults. The 3600 series is equipped with a torsion bar which ensures that the runways remain level, even with an unevenly distributed load. The precision design and the quality of the components guarantee the maximum structural stability and absolute reliability over time.
Main charachteristics
-
Free-wheel scissors lift-table with maximum capacity of 3600kg.
-
3600 series with torsion bar for perfect levelling of runways, even with an unevenly distributed load.
-
Base with adjustable feet for perfect levelling of the lift both in working position and when fully closed.
-
Emergency hand pump.
-
Mechanism consisting of a locking pawl and rack system to block accidental descent (every 100 mm) in the event of hydraulic hose failure.
-
Counterbalancing valve installed on the lift cylinder discharge to block accidental descent in the event of hydraulic hose failure.
-
Equipped with anti-crushing safety device which stops the lift at a height of 450 mm above the ground during lowering and requires a restart before continuing the descent.
-
Electromechanical device to block lift ascent/descent in the event of runway misalignment.
-
Anti-crushing device consisting of a rubber-backed fabric side guard for the additional lift-table.
-
Available with access ramps positioned on the floor and with suspended runways to avoid bulky objects on the ground when the lift is in working position.
-
Slip plates (with manual locking) featuring transversal and diagonal movement for wheel alignment (supplied as standard in CT versions).
-
Built-in free-wheel lift-table with maximum capacity of 3600 Kg (supplied as standard in LT versions) complete with rubber-backed fabric side guards; extendable runways for long wheel base vehicles.
-
Pressure switch (on LT models only) to block lift ascent/descent in the event of runway misalignment.
-
Extensions for the PT400 play detector with four directions of movement for checking the front axle (supplied as standard in PT4 versions); the PT400 play detector is hydraulically powered by means of the same control cabinet as the lift and is equipped with an inspection lamp fitted with a control device.
